TR
EN
B0054 Second Row Center Seat Belt Sensor Fault
The B0054 Second Row Center Seat Belt Sensor Fault diagnostic trouble code indicates that the vehicle's Supplemental Restraint System (SRS) or restraint control module has detected a problem involving the center seat belt sensor in the second row.
The second-row center seat belt sensor is part of the vehicle's restraint and seat belt monitoring system. Depending on the manufacturer and vehicle design, the sensor may be integrated into the seat belt buckle or connected to a dedicated restraint-system circuit.
The sensor can provide information about whether the seat belt is properly buckled. Depending on the vehicle, this information may be used for:
-
Seat belt warning functions
-
Passenger safety monitoring
-
SRS diagnostics
-
Occupant-restraint strategies
-
Other manufacturer-specific safety functions
When the restraint control module receives a missing, incorrect, intermittent, or unexpected signal from the second-row center seat belt sensor circuit, it can store B0054.
The exact definition of B0054 may vary between manufacturers and model years. Vehicle-specific diagnostic information should therefore be used to confirm the affected component and circuit.
What Does B0054 Mean?
B0054 generally identifies a fault involving the second-row center seat belt sensing circuit.
The restraint control module expects a specific electrical signal according to the condition of the seat belt buckle.
A simplified operation is:
-
The second-row center seat belt is unbuckled.
-
The buckle sensor sends the corresponding electrical signal.
-
The seat belt tongue is inserted into the buckle.
-
The sensor changes its electrical state.
-
The restraint control module detects the signal change.
-
The vehicle updates the seat belt status.
If the signal is missing, intermittent, incorrect, or outside the expected operating range, the module may store B0054.
Possible causes include:
-
Faulty seat belt buckle sensor
-
Internal buckle switch failure
-
Open circuit
-
Short circuit
-
High circuit resistance
-
Damaged wiring
-
Loose electrical connector
-
Corroded terminals
-
Physical buckle damage
-
Restraint control module fault
What Is the Second-Row Center Seat Belt Sensor?
The second-row center seat belt sensor is associated with the center seating position in the vehicle's second row.
Depending on the vehicle, the sensor may be:
-
Integrated into the seat belt buckle
-
Connected directly to the buckle assembly
-
Part of the seat restraint wiring harness
Its main purpose is to communicate the seat belt's condition to the restraint control module.
Seat Belt Unbuckled
The sensor sends a signal indicating that the belt is not secured.
Seat Belt Buckled
When the belt is correctly latched, the electrical signal changes.
The vehicle can use this information for:
-
Seat belt status displays
-
Seat belt warning systems
-
Passenger monitoring
-
Restraint-system diagnostics
-
Occupant safety functions
The exact functions depend on the manufacturer and restraint-system design.
Why Is the Second-Row Center Seat Belt Sensor Important?
Seat belt monitoring is an important part of modern vehicle safety systems.
A faulty sensor may prevent the vehicle from correctly identifying the condition of the center seat belt.
Depending on the system design, the fault may affect:
-
Seat belt reminder operation
-
Passenger monitoring
-
SRS diagnostics
-
Occupant-restraint monitoring
-
Seat belt pretensioner monitoring
B0054 does not automatically mean that an airbag or seat belt pretensioner has failed. However, it indicates that the vehicle has detected a restraint-system fault that requires proper diagnosis.
Symptoms of B0054
The symptoms depend on the vehicle and the exact nature of the fault.
Airbag or SRS Warning Light
The airbag or SRS warning light may illuminate.
Seat Belt Warning
The vehicle may display a warning for the second-row center seating position.
Incorrect Unbuckled Warning
The vehicle may indicate that the center seat belt is unbuckled even when it is properly fastened.
Incorrect Buckled Status
The system may incorrectly recognize the seat belt as buckled.
Seat Belt Warning Chime
The warning chime may operate unexpectedly or fail to operate correctly.
Intermittent Warning Light
A loose connector or damaged wire may cause an intermittent SRS warning.
No Noticeable Driving Problems
Because B0054 is a body and restraint-system code, the vehicle may otherwise drive normally.
Common Causes of B0054
Several electrical and mechanical problems can trigger the B0054 code.
Faulty Center Seat Belt Buckle Sensor
The internal sensor can fail because of:
-
Normal wear
-
Electrical failure
-
Internal contamination
-
Damaged contacts
-
Mechanical buckle failure
Damaged Seat Belt Buckle
Physical damage can prevent the internal sensor or switch from operating correctly.
Possible causes include:
-
Foreign objects inside the buckle
-
Dirt or debris
-
Excessive force
-
Liquid contamination
-
Mechanical damage
Damaged Wiring
The second-row center seat belt wiring can be damaged by:
-
Seat movement
-
Folding seats
-
Sliding seats
-
Passenger contact
-
Cargo
-
Previous repairs
Possible wiring problems include:
-
Pinched wires
-
Broken wires
-
Chafed insulation
-
Open circuits
-
Short circuits
-
Excessive circuit resistance
Loose Electrical Connector
A connector may become loose after:
-
Seat removal
-
Interior repairs
-
Carpet replacement
-
Seat movement
-
Electrical modifications
Corroded Terminals
Moisture can cause:
-
Corroded terminals
-
Increased electrical resistance
-
Intermittent signals
-
Poor electrical contact
Previous Seat or Interior Repairs
B0054 can appear after:
-
Seat removal
-
Seat replacement
-
Carpet installation
-
Interior trim removal
-
Audio-system installation
-
Electrical modifications
Restraint Control Module Fault
A restraint control module fault is possible but is generally less common than a sensor or wiring problem.
The sensor, buckle, wiring, and connectors should normally be tested before the module is suspected.
Vehicles Commonly Affected by B0054
B0054 can occur on vehicles equipped with electronically monitored second-row center seat belts.
Examples can include:
-
Chevrolet Tahoe
-
Chevrolet Suburban
-
GMC Yukon
-
Cadillac Escalade
-
Ford Expedition
-
Ford Explorer
-
Lincoln Navigator
-
Toyota Sequoia
-
Toyota Highlander
-
Nissan Armada
-
Nissan Pathfinder
-
Infiniti QX80
-
Jeep Grand Cherokee L
-
Dodge Durango
-
Volkswagen Atlas
-
Audi Q7
-
Volvo XC90
-
Mercedes-Benz GLS
-
BMW X7
-
Kia Telluride
-
Hyundai Palisade
This is not a complete application list.
The exact definition of B0054 can vary according to the manufacturer, model year, restraint control module, and seat belt system configuration. Vehicle-specific diagnostic information should be used to identify the exact affected component.
How B0054 Is Diagnosed
B0054 should be diagnosed using an SRS/airbag-capable diagnostic scanner.
A basic engine-code scanner may not be able to communicate with the restraint control module.
Scan the SRS Module
Retrieve:
-
Current codes
-
Stored codes
-
History codes
-
Manufacturer-specific subfaults
-
Related SRS codes
Additional codes can help determine whether B0054 is an isolated seat belt sensor problem.
Inspect the Second-Row Center Seat Belt Buckle
Check the buckle and surrounding area for:
-
Physical damage
-
Foreign objects
-
Dirt or contamination
-
Loose mounting
-
Mechanical latch problems
The seat belt should latch and release normally.
Inspect the Wiring Harness
The wiring leading to the second-row center seat belt should be inspected for:
-
Pinched wires
-
Broken conductors
-
Chafed insulation
-
Exposed wiring
-
Incorrect previous repairs
-
Damage caused by seat movement
Inspect the Electrical Connector
Check the connector for:
-
Loose connections
-
Corrosion
-
Bent terminals
-
Water intrusion
-
Damaged connector locks
A connector can appear properly connected while still having poor terminal contact.
Check the Sensor Circuit
Following the manufacturer's diagnostic procedure, technicians may test:
-
Circuit continuity
-
Circuit resistance
-
Short-to-ground conditions
-
Short-to-power conditions
-
Sensor signal voltage
The correct procedure depends on the vehicle.
Important: Some SRS-related circuits are associated with pyrotechnic components, including seat belt pretensioners. Always follow the manufacturer's specified safety procedure before disconnecting or testing restraint-system components.
Monitor Live SRS Data
If supported by the diagnostic tool, technicians can monitor the second-row center seat belt status.
The live data should change correctly when the seat belt is:
-
Buckled
-
Unbuckled
If the status does not change despite normal buckle operation, the sensor or its circuit may be faulty.
How to Fix B0054
The correct repair depends on the confirmed cause.
Repair Damaged Wiring
Possible repairs include:
-
Repair broken wires
-
Replace damaged harness sections
-
Repair pinched wiring
-
Restore damaged insulation
-
Secure the harness away from moving seat components
Repair or Replace the Connector
Connector repairs may include:
-
Replacing damaged terminals
-
Replacing the connector housing
-
Correcting terminal tension
-
Cleaning corrosion where appropriate
Replace the Seat Belt Buckle or Sensor
If testing confirms that the second-row center seat belt sensor or buckle switch is defective, the affected component may need replacement.
On many vehicles, the sensor is integrated into the seat belt buckle and is not separately serviceable.
Repair or Replace the Restraint Control Module
If the sensor, wiring, and connectors test correctly, the restraint control module may require further diagnosis.
Depending on the vehicle, this may involve:
-
Software programming
-
Module configuration
-
Professional module repair
-
Module replacement
What to Do After Repairing B0054
After completing the repair:
-
Follow the manufacturer's SRS safety procedure.
-
Clear the B0054 diagnostic trouble code.
-
Monitor the second-row center seat belt status with the scan tool.
-
Buckle and unbuckle the seat belt to verify signal changes.
-
Confirm that the airbag/SRS warning light remains off.
-
Perform a complete SRS diagnostic scan.
-
Verify that no related restraint-system codes remain.
Can You Drive With B0054?
The vehicle may continue to operate normally because B0054 does not usually affect:
-
Engine operation
-
Transmission operation
-
Basic steering
-
Normal braking
However, B0054 should not be ignored because it involves the vehicle's safety restraint system.
If the SRS warning light is illuminated, the correct operation of all affected restraint functions should not be assumed until the fault has been diagnosed and repaired.
Is B0054 a Serious Code?
B0054 should be considered an important safety-related diagnostic trouble code.
Although the vehicle may continue to drive normally, the code can affect safety-system monitoring.
Potentially affected functions include:
-
Seat belt status monitoring
-
Seat belt warning systems
-
Passenger monitoring
-
SRS diagnostics
-
Pretensioner monitoring
An illuminated airbag or SRS warning light should always be investigated.
How to Prevent B0054
Recommended practices include:
-
Avoid damaging wiring underneath second-row seats.
-
Inspect wiring after moving, folding, or removing seats.
-
Keep electrical connectors dry.
-
Do not modify SRS wiring.
-
Repair damaged seat belt components promptly.
-
Keep the buckle free from dirt and foreign objects.
-
Avoid forcing or twisting the seat belt buckle.
-
Address SRS warning lights promptly.
-
Follow manufacturer procedures during seat and interior repairs.
B0054 vs. Other Related Seat Belt Codes
B0054 belongs to a group of restraint-system diagnostic codes associated with second- and third-row seat belt sensors.
| Code | Description |
|---|---|
| B0054 | Second Row Center Seat Belt Sensor Fault |
| B0055 | Second Row Right Seat Belt Sensor Fault |
| B0056 | Third Row Left Seat Belt Sensor Fault |
| B0057 | Third Row Center Seat Belt Sensor Fault |
| B0058 | Third Row Right Seat Belt Sensor Fault |
The exact definitions and code assignments can vary between manufacturers. Vehicle-specific service information should always take priority during diagnosis.
Final Thoughts
The B0054 Second Row Center Seat Belt Sensor Fault diagnostic trouble code indicates that the vehicle's restraint control system has detected an abnormal condition involving the center seat belt sensor in the second row.
Common causes include:
-
Faulty seat belt buckle sensor
-
Defective internal buckle switch
-
Damaged wiring
-
Pinched harness
-
Loose connector
-
Corroded terminals
-
Physical buckle damage
-
Previous seat or interior repairs
-
Restraint control module problems
The best diagnostic approach is to scan the SRS module, inspect the second-row center seat belt buckle, check the wiring and connectors, monitor live seat belt data, and test the sensor circuit according to the manufacturer's diagnostic procedure.
Because this is a safety restraint-system fault, B0054 should be diagnosed and repaired rather than simply clearing the code. Any work involving SRS components should follow the manufacturer's specified safety procedures.
